Plasma Freckle removal pen work principle : similar as carbon dioxide (CO2) laser beauty machine, it use new generation of plasma micro district discharge technology with low temperature and high frequency , it is efficient capacity conversion material and chip control . when the needle touch the freckle skin,it produce plasma with high temperature as 2000 ℃ immedicately, then it can carbide the spot freckle , removal it.
When it touch the freckle ,spot ,it will produce a small flame,we called it carbide problem skin.The micro vascular will be solidified quicly without bleeding.Then it will formed carbon scabs ,protect wound skin from infection. After about 1 week, scab will sheeding without scar.
How to use
1.Insert the needle to the machine .
2.Connect the power adaptor to the machine .
3.Press ON/OFF button for few seconds .
4.Adjust the power and the frequency the machine .
5.It is ready to use when the power button blinks by pressing ON switch again .
6.It will stop and activate if you press or release “SHOT” button .
7.After procedure , press the “ON”button few seconds to stop .
8.Move left to right rather than stay on the spot while using the Tip.
9.Use short touch several times rather than one long touch while using the Tip